Effect of networked Cu-rich ferrite phase on proof stress and ultimate tensile strength of sintered bodies of Fe–Cu hybrid-alloyed steel powder with graphite

Y. Shigeta, M. Aramaki, K. Ashizuka, Y. Ikoma, Y. Ozaki

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

To improve the yield strength of powder metallurgy steel, this work investigated the effect of a Cu-rich networked phase. Mixtures of 0.7% graphite and Fe–3% Cu hybrid-alloyed steel powders, composed of pre-alloyed Fe–3 x % Cu particles with diffusion-bonded 3(1 − x) % Cu (0 ≤ x ≤ 1), were processed by high-density compaction and conventional sintering. The maximum values of 0.2% proof stress (YS) and ultimate tensile strength (UTS) were obtained at x = 0.68, where high-density compact with well-networked Cu-rich ferrite phase was developed without Cu growth. Moreover, nanosized ϵ-Cu precipitates were observed in the Cu-rich ferrite. These high YS and UTS were achieved not only by decreases in porosity but also by precipitation strengthening caused by the nanosized ϵ-Cu in the Cu-rich ferrite network.

Original languageEnglish
Pages (from-to)134-141
Number of pages8
JournalPowder Metallurgy
Volume64
Issue number2
DOIs
Publication statusPublished - 2021

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites
  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Effect of networked Cu-rich ferrite phase on proof stress and ultimate tensile strength of sintered bodies of Fe–Cu hybrid-alloyed steel powder with graphite'. Together they form a unique fingerprint.

Cite this