Effect of MIM Processing Parameters on the Properties of 440C Stainless Steel

Wan Sharuzi Wan Harun, Kinji Toda, Toshiko Osada, Hyungoo Kang, Fujio Tsumori, Hideshi Miura

Research output: Contribution to journalArticlepeer-review


In order to develop the high-strength and high-hardness 440C stainless steel compacts, metal injection molding process was applied. In this study, we focused on the effect of sintering atmosphere, powder loading, and carbon addition on the mechanical properties and microstructures. The injection molded compacts were debound by solvent debinding followed by thermal debinding, and sintered at three sintering temperatures; 1240, 1250, and 1260°C in two atmospheres; pure hydrogen and partial vacuum. Three levels of powder loading 60, 63, and 64 vol% were prepared. Compacts were heat treated in order to enhance the performance. Although the sintered compacts in pure hydrogen obtained higher density, the performance offered by partial vacuum sintered compacts was found to be far better. Compact density of 98 % and hardness 63 HRC were achieved at powder loading of 63 vol% with additional 0.4 mass% C.
Original languageEnglish
Pages (from-to)264-271
Number of pages8
JournalJournal of the Japan Society of Powder and Powder Metallurgy
Issue number5
Publication statusPublished - May 15 2012


Dive into the research topics of 'Effect of MIM Processing Parameters on the Properties of 440C Stainless Steel'. Together they form a unique fingerprint.

Cite this