Development of Fe base phase change materials for high temperature using solid-solid transformation

Koki Nishioka; Naoyuki Suura; Ko Ichiro Ohno; Takayuki Maeda; Masakata Shimizu

doi:10.2355/isijinternational.50.1240

Development of Fe base phase change materials for high temperature using solid-solid transformation

Koki Nishioka, Naoyuki Suura, Ko Ichiro Ohno, Takayuki Maeda, Masakata Shimizu

Research output: Contribution to journal › Article › peer-review

11 Citations (Scopus)

Abstract

Fe base Phase Change Materials (PCM) for high temperature around 953-1 273 K using multiple solid-solid transformations were developed. The amount of latent heat of PCM samples were measured by Differential Scanning Calorimetry. The amount of latent heat of Fe-xCo samples increased with increasing Co addition. The reducing atmosphere was suitable for the samples developed in this work. The durability performance of samples was confirmed by heat treatment experiments. From the viewpoint of heat accumulation/supply ability, cost and durability performance, Fe-Co(-Cr) system alloy is one of the most suitable Phase Change Materials for heat recovery from high temperature exhaust gases.

Original language	English
Pages (from-to)	1240-1244
Number of pages	5
Journal	isij international
Volume	50
Issue number	9
DOIs	https://doi.org/10.2355/isijinternational.50.1240
Publication status	Published - 2010

All Science Journal Classification (ASJC) codes

Mechanics of Materials
Mechanical Engineering
Metals and Alloys
Materials Chemistry

Access to Document

10.2355/isijinternational.50.1240

Cite this

@article{12a73fda4f9b4743881826f39c0eeaee,

title = "Development of Fe base phase change materials for high temperature using solid-solid transformation",

abstract = "Fe base Phase Change Materials (PCM) for high temperature around 953-1 273 K using multiple solid-solid transformations were developed. The amount of latent heat of PCM samples were measured by Differential Scanning Calorimetry. The amount of latent heat of Fe-xCo samples increased with increasing Co addition. The reducing atmosphere was suitable for the samples developed in this work. The durability performance of samples was confirmed by heat treatment experiments. From the viewpoint of heat accumulation/supply ability, cost and durability performance, Fe-Co(-Cr) system alloy is one of the most suitable Phase Change Materials for heat recovery from high temperature exhaust gases.",

author = "Koki Nishioka and Naoyuki Suura and Ohno, {Ko Ichiro} and Takayuki Maeda and Masakata Shimizu",

year = "2010",

doi = "10.2355/isijinternational.50.1240",

language = "English",

volume = "50",

pages = "1240--1244",

journal = "isij international",

issn = "0915-1559",

publisher = "Iron and Steel Institute of Japan",

number = "9",

}

TY - JOUR

T1 - Development of Fe base phase change materials for high temperature using solid-solid transformation

AU - Nishioka, Koki

AU - Suura, Naoyuki

AU - Ohno, Ko Ichiro

AU - Maeda, Takayuki

AU - Shimizu, Masakata

PY - 2010

Y1 - 2010

N2 - Fe base Phase Change Materials (PCM) for high temperature around 953-1 273 K using multiple solid-solid transformations were developed. The amount of latent heat of PCM samples were measured by Differential Scanning Calorimetry. The amount of latent heat of Fe-xCo samples increased with increasing Co addition. The reducing atmosphere was suitable for the samples developed in this work. The durability performance of samples was confirmed by heat treatment experiments. From the viewpoint of heat accumulation/supply ability, cost and durability performance, Fe-Co(-Cr) system alloy is one of the most suitable Phase Change Materials for heat recovery from high temperature exhaust gases.

AB - Fe base Phase Change Materials (PCM) for high temperature around 953-1 273 K using multiple solid-solid transformations were developed. The amount of latent heat of PCM samples were measured by Differential Scanning Calorimetry. The amount of latent heat of Fe-xCo samples increased with increasing Co addition. The reducing atmosphere was suitable for the samples developed in this work. The durability performance of samples was confirmed by heat treatment experiments. From the viewpoint of heat accumulation/supply ability, cost and durability performance, Fe-Co(-Cr) system alloy is one of the most suitable Phase Change Materials for heat recovery from high temperature exhaust gases.

UR - http://www.scopus.com/inward/record.url?scp=78649368665&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78649368665&partnerID=8YFLogxK

U2 - 10.2355/isijinternational.50.1240

DO - 10.2355/isijinternational.50.1240

M3 - Article

AN - SCOPUS:78649368665

SN - 0915-1559

VL - 50

SP - 1240

EP - 1244

JO - isij international

JF - isij international

IS - 9

ER -

Development of Fe base phase change materials for high temperature using solid-solid transformation

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this