TY - JOUR

T1 - Development of a new phantom simulating extracellular space of tumor cell growth and cell edema for diffusion-weighted magnetic resonance imaging

AU - Mikayama, Ryoji

AU - Yabuuchi, Hidetake

AU - Matsumoto, Ryoji

AU - Kobayashi, Koji

AU - Yamashita, Yasuo

AU - Kimura, Mitsuhiro

AU - Kamitani, Takeshi

AU - Sagiyama, Koji

AU - Yamasaki, Yuzo

N1 - Publisher Copyright:
© 2020, European Society for Magnetic Resonance in Medicine and Biology (ESMRMB).

PY - 2020/8/1

Y1 - 2020/8/1

N2 - Objective: A phantom for diffusion-weighted imaging is required to standardize quantitative evaluation. The objectives were to develop a phantom simulating various cell densities and to evaluate repeatability. Materials and methods: The acrylic fine particles with three different diameters were used to simulate human cells. Four-degree cell density components were developed by adjusting the volume of 10-μm particles (5, 20, 35, and 50% volume, respectively). Two-degree components to simulate cell edema were also developed by adjusting the diameter without changing number (17% and 40% volume, respectively). Spearman’s rank correlation coefficient was used to find a significant correlation between apparent diffusion coefficient (ADC) and particle density. Coefficient of variation (CV) for ADC was calculated for each component for 6 months. A p value < 0.05 represented a statistically significance. Results: Each component (particle ratio of 5, 17, 20, 35, 40, and 50% volume, respectively) presented ADC values of 1.42, 1.30, 1.30, 1.12, 1.09, and 0.89 (× 10−3 mm2/s), respectively. A negative correlation (r = − 0.986, p < 0.05) was observed between ADC values and particle ratio. CV for ADC was less than 5%. Discussion: A phantom simulating the diffusion restriction correlating with cell density and size could be developed.

AB - Objective: A phantom for diffusion-weighted imaging is required to standardize quantitative evaluation. The objectives were to develop a phantom simulating various cell densities and to evaluate repeatability. Materials and methods: The acrylic fine particles with three different diameters were used to simulate human cells. Four-degree cell density components were developed by adjusting the volume of 10-μm particles (5, 20, 35, and 50% volume, respectively). Two-degree components to simulate cell edema were also developed by adjusting the diameter without changing number (17% and 40% volume, respectively). Spearman’s rank correlation coefficient was used to find a significant correlation between apparent diffusion coefficient (ADC) and particle density. Coefficient of variation (CV) for ADC was calculated for each component for 6 months. A p value < 0.05 represented a statistically significance. Results: Each component (particle ratio of 5, 17, 20, 35, 40, and 50% volume, respectively) presented ADC values of 1.42, 1.30, 1.30, 1.12, 1.09, and 0.89 (× 10−3 mm2/s), respectively. A negative correlation (r = − 0.986, p < 0.05) was observed between ADC values and particle ratio. CV for ADC was less than 5%. Discussion: A phantom simulating the diffusion restriction correlating with cell density and size could be developed.

UR - http://www.scopus.com/inward/record.url?scp=85077266711&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85077266711&partnerID=8YFLogxK

U2 - 10.1007/s10334-019-00823-6

DO - 10.1007/s10334-019-00823-6

M3 - Article

C2 - 31897902

AN - SCOPUS:85077266711

SN - 0968-5243

VL - 33

SP - 507

EP - 513

JO - Magnetic Resonance Materials in Physics, Biology and Medicine

JF - Magnetic Resonance Materials in Physics, Biology and Medicine

IS - 4

ER -