Development of a high current supersonic ion source for electromagnetic accelerators

Kei ich Hirano, Kiwamu Sugisaki, Kuninori Sato, Mikio Mimura, Akihide Fujisawa, Junji Fujita

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)


The first report is presented on a supersonic ion source for electromagnetic (EM) accelerators, which in principle affords a much higher ion beam power than electrostatic accelerators because there is no space charge limiting effect. None of the present EM systems, however, operate as expected. The reason for this failure has been analyzed (K. Hirano, J. Plasma Fusion Res., 69 (1993) 684, 806) and attributed mainly to the fact that the EM force does not accelerate but even chokes the subsonic plasma flow which appears during the ionization phase of the inlet gas. Since this difficulty may be overcome by an ion source supplying a supersonic plasma flow to the EM system, development of such an ion source has started based on a thermal arc jet with the aim of yielding an ion current density of about 200 A cm-2. The advantages of a structure with a very narrow arc constrictor hole are known, so a hole size as large as 1 mm in diameter was tested to begin with. Favorable results of the experiments were that the arc jet can produce an arc current of 170 A and ejects a smooth symmetric plasma column from the expanding exit nozzle without producing any notable damage on both the cathode and anode surfaces.

Original languageEnglish
Pages (from-to)529-534
Number of pages6
JournalFusion Engineering and Design
Issue number1-4
Publication statusPublished - Jan 1 1995
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Nuclear Energy and Engineering
  • General Materials Science
  • Mechanical Engineering


Dive into the research topics of 'Development of a high current supersonic ion source for electromagnetic accelerators'. Together they form a unique fingerprint.

Cite this