Cycle Optimization on Reheat Adsorption Cycle Applying Fixed Chilled Water Outlet Temperature

I. Gusti Agung Bagus Wirajati, Yuki Ueda, Atsushi Akisawa, Takahiko Miyazaki

    Research output: Contribution to journalArticlepeer-review

    4 Citations (Scopus)


    This study investigated the cycle optimization of four-bed, silica gel-water adsorption with reheat cycle, where the desorber (upper bed) and adsorber (lower bed) always interact with the condenser and evaporator, to exploit a low heat-source temperature. In a previous study, the performance of a reheat cycle with chilled water outlet temperature fixed at 9°C was observed without considering the cycle optimization. Maintaining a constant chilled water outlet temperature is also of equal importance to improve the conversion efficiency so that maximum cooling capacity can be derived. In this paper, a simulation model of reheat adsorption cycles is developed to analyze the optimization of the cycle time, including adsorption/desorption time, mass recovery time, and preheating/precooling time, with chilled water outlet temperature fixed. The reheat working principle is also introduced. The proposed cycle is compared with the four-bed versison without reheat cycle in terms of coefficient of performance (COP) and cooling capacity. The result shows that the performance of a reheat cycle is superior to that of four-bed version without reheat, especially for low heat-source temperature. For low heat-source temperature (55-65°C) both COP and cooling capacity of the reheat cycle with optimization were raised significantly compared to the high heat-source temperature (70-80°C).

    Original languageEnglish
    Pages (from-to)606-615
    Number of pages10
    JournalHeat Transfer Engineering
    Issue number7-8
    Publication statusPublished - May 23 2016

    All Science Journal Classification (ASJC) codes

    • Condensed Matter Physics
    • Mechanical Engineering
    • Fluid Flow and Transfer Processes


    Dive into the research topics of 'Cycle Optimization on Reheat Adsorption Cycle Applying Fixed Chilled Water Outlet Temperature'. Together they form a unique fingerprint.

    Cite this