Changes of optical properties of retroreflector installed in LHD

T. Akiyama, K. Kawahata, N. Ashikawa, M. Tokitani, S. Okajima, K. Nakayama, N. Yoshida, A. Ebihara, K. Tokunaga, Y. Ohtawa, S. Tsuji-lio

Research output: Contribution to journalArticlepeer-review

17 Citations (Scopus)


This article describes changes of optical properties of retroreflectors installed on the inner wall of the vacuum vessel of the Large Helical Device. They were made of stainless steel and were used for a CO2 laser Polarimeter. The reflectivity for a CO2 laser beam dropped up to 40% after the start of glow discharge cleanings and main plasma experiments. Then it decreased gradually. The reflectivity in a wavelength range shorter than 10 μm decreased significantly through one experimental campaign (about 4 months). On the other hand the reflectivity in a wavelength range longer than 50 μm was larger than 70%. Decrease in the reflectivity in the central region of mirrors was more significant (the reflectivity for visible beams became almost zero) than that in the edge. The distribution of the reflectivity along the radial direction is expected to be related to the shape of the retroreflector. The parallelism of the reflected beam to an incident one also deteriorated. The changes in the polarization angle and in the ellipticity of reflected light polarization were not observed from the visible to the far infrared range.

Original languageEnglish
Article number103501
JournalReview of Scientific Instruments
Issue number10
Publication statusPublished - 2007

All Science Journal Classification (ASJC) codes

  • Instrumentation


Dive into the research topics of 'Changes of optical properties of retroreflector installed in LHD'. Together they form a unique fingerprint.

Cite this