Boundary resistance in SC composite wires and cryogenic stability

K. Ishibashi, M. Wake, M. Kobayashi, A. Katase

Research output: Contribution to journalArticlepeer-review

7 Citations (Scopus)


The measurement of transverse resistivity of NbTi composite wires has shown already the existence of a resistive barrier between SC filaments and the copper matrix. The electric and thermal resistances of this barrier are respectively much higher than those of copper matrix and this barrier is expected to have an influence on the cryogenic stability of composite wires. The transverse and longitudinal resistivities are measured for NbTi composite wires which were heat-treated at different temperatures from 300°C to 600°C. These measurements show that the barrier grows with the heat-treatment temperature. From the experimental results, the effect of the barrier on cryogenic stability is estimated to be negligibly small for the composite wire which is heat-treated under the normal condition. As for Nb3Sn composite wires, two different structures of composite wires, each of which has a tantalum or niobium diffusion barrier, are studied and the same measurements as on NbTi composite wires are carried out. The results obtained indicate that the transverse resistivity depends appreciably on the structure of composite wires and that the larger transverse resistivity reduces not only the cryogenic stability, but also requires a larger transfer length at a current lead junction.

Original languageEnglish
Pages (from-to)161-166
Number of pages6
Issue number3
Publication statusPublished - Mar 1979
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • General Materials Science
  • General Physics and Astronomy


Dive into the research topics of 'Boundary resistance in SC composite wires and cryogenic stability'. Together they form a unique fingerprint.

Cite this