An analysis of mode I interlaminar deformation ahead of crack front in composite DCB specimens

K. Arakawa, K. Takahashi

    Research output: Contribution to journalArticlepeer-review

    1 Citation (Scopus)

    Abstract

    An analytical model was employed to study mode I interlaminar deformation in double cantilever beam specimens of unidirectional carbon fiber/epoxy laminates. The crack opening displacements experimentally determined by moire interferometry were compared with the model to evaluate the interlaminar tensile modulus and strain distribution ahead of the crack front. The findings showed that the modulus makes an important contribution to increasing the value of crack opening displacement, and that the strain distribution was dependent on both the modulus and thickness of the specimen. Also, a specific correlation was recognized between the modulus and the maximum strain evaluated at the crack tip.

    Original languageEnglish
    Pages (from-to)41-50
    Number of pages10
    JournalInternational Journal of Fracture
    Volume77
    Issue number1
    DOIs
    Publication statusPublished - 1996

    All Science Journal Classification (ASJC) codes

    • Computational Mechanics
    • Modelling and Simulation
    • Mechanics of Materials

    Fingerprint

    Dive into the research topics of 'An analysis of mode I interlaminar deformation ahead of crack front in composite DCB specimens'. Together they form a unique fingerprint.

    Cite this