Aeroelastic analysis of a coplanar twin-rotor wind turbine

Amr Ismaiel, Shigeo Yoshida

    Research output: Contribution to journalArticlepeer-review

    18 Citations (Scopus)

    Abstract

    Multi-rotor system (MRS) wind turbines can be a competitive alternative to large-scale wind turbines. In order to address the structural behavior of the turbine tower, an in-house aeroelastic tool has been developed to study the dynamic responses of a 2xNREL 5MW twin-rotor configuration wind turbine. The developed tool has been verified by comparing the results of a single-rotor configuration to a FAST analysis for the same simulation conditions. Steady flow and turbulent load cases were investigated for the twin-rotor configuration. Results of the simulations have shown that elasticity of the tower should be considered for studying tower dynamic responses. The tower loads, and deformations are not straightforward with the number of rotors added. For an equivalent tower, an additional rotor will increase the tower-top deflection, and the tower-base bending moment both in the fore-aft direction will be more than doubled. The tower torsional stiffness becomes a crucial factor in the case of a twin-rotor tower to avoid a severe torsional deflection. Tower natural frequencies are dominant over the flow conditions in regards to the loads and deflections.

    Original languageEnglish
    Article number1881
    JournalEnergies
    Volume12
    Issue number10
    DOIs
    Publication statusPublished - 2019

    All Science Journal Classification (ASJC) codes

    • Control and Optimization
    • Energy (miscellaneous)
    • Engineering (miscellaneous)
    • Energy Engineering and Power Technology
    • Electrical and Electronic Engineering
    • Building and Construction
    • Fuel Technology
    • Renewable Energy, Sustainability and the Environment

    Fingerprint

    Dive into the research topics of 'Aeroelastic analysis of a coplanar twin-rotor wind turbine'. Together they form a unique fingerprint.

    Cite this