Yoshimi Sonoda

Research output

Research output per year 1987 2011 2014 2016 2018 2020 2025

• 29 Article
• 24 Conference contribution
• 12 Conference article
• 2 Paper
• 3 More
  • 2 Editorial
  • 1 Chapter

Research output per year

Research output per year

Search results

• 2021

  A basic study on characteristics of RC beam using ESCON

  Nozawa, T., Kobayashi, Y., Sonoda, Y. & Tamai, H., 2021, Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations - Proceedings of the 10th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2020. Yokota, H. & Frangopol, D. M. (eds.). CRC Press/Balkema, p. 1225-1231 7 p. (Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations - Proceedings of the 10th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • High Strength 100%
  • Beam 100%
  • High Stress 66%
  • Structural Members 33%
  • Characteristics 33%
• 2019

  Impact response analysis of RC slab with polyurea resin by SPH method

  Lu, C. & Sonoda, Y., 2019, 13th International Conference on Shock and Impact Loads on Structures, SILOS 2019. Ren, F., Wu, C. & Lok, T. S. (eds.). CI-Premier Pte Ltd, p. 353-360 8 p. (13th International Conference on Shock and Impact Loads on Structures, SILOS 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Resin 100%
  • Structural Members 40%
  • Performance 40%
  • Impact Response 40%
  • Stability 20%
• 2016

  A numerical study on the pull-out strengths of anchor bolts embedded in concrete using the smoothed particle hydrodynamics method

  Sonoda, Y., 2016, Concrete under Severe Conditions - Environment and Loading. Colombo, M. & di Prisco, M. (eds.). Trans Tech Publications Ltd, p. 1111-1117 7 p. (Key Engineering Materials; vol. 711).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Anchor Bolt 100%
  • Failure (Mechanical) 50%
  • Hydrodynamics 33%
  • Analysis Method 16%
  • Fracture 16%
  6 Citations (Scopus)
• 2014

  An analytical study on dynamic strength evaluation of perfobond strip shear connectors

  Munemoto, S. & Sonoda, Y., 2014, Proceedings of the 8th International Symposium on Impact Engineering. Trans Tech Publications Ltd, p. 179-184 6 p. (Applied Mechanics and Materials; vol. 566).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Shear Connector 100%
  • Simulation 66%
  • Statics 66%
  • Concrete 66%
  • Failure Mechanism 66%
  1 Citation (Scopus)

• Failure behavior and numerical simulation of the local damage of ultra high strength fiber reinforced concrete subjected to high velocity impact

  Cheon, S. B., Beppu, M., Sonoda, Y. & Itoh, M., 2014, Proceedings of the 8th International Symposium on Impact Engineering. Trans Tech Publications Ltd, p. 205-210 6 p. (Applied Mechanics and Materials; vol. 566).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • High Strength 100%
  • Computer Simulation 100%
  • Impact Test 100%
  • Fibre-Reinforced Concrete 100%
  • Failure Behavior 100%
  3 Citations (Scopus)

• Present status and future problems on the impact resistance performance design of civil engineering protective structures

  Sonoda, Y., 2014, Proceedings of the 8th International Symposium on Impact Engineering. Trans Tech Publications Ltd, p. 10-25 16 p. (Applied Mechanics and Materials; vol. 566).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Design Method 100%
  • Design 66%
  • Performance 66%
  • Impact Resistance 66%
  • Impact Loads 66%
  4 Citations (Scopus)
• 2013

  An analytical study on the dynamic strength of perforrated steel plate shear connectors

  Munemoto, S. & Sonoda, Y., 2013, 10th International Conference on Shock and Impact Loads on Structures 2013. CI-Premier Pte Ltd, p. 433-440 8 p. (10th International Conference on Shock and Impact Loads on Structures 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bearing Capacity 100%
  • Failure (Mechanical) 66%
  • Failure 66%
  • Design 33%
  • Static Loading 33%

• A study on the impact resistance of pin fixed cable restrainers for bridges

  Uno, M., Tamai, H., Yuki, Y., Sonoda, Y. & Kasugai, T., 2013, 10th International Conference on Shock and Impact Loads on Structures 2013. CI-Premier Pte Ltd, p. 471-480 10 p. (10th International Conference on Shock and Impact Loads on Structures 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Design Method 100%
  • Impact Loads 100%
  • Bridges 100%
  • Impact Resistance 100%
  • Models 50%

• Case study of damage of pc bridge by vehicle collision and its numerical analysis

  Tamai, H., Cheon, S., Goya, S. & Sonoda, Y., 2013, 10th International Conference on Shock and Impact Loads on Structures 2013. CI-Premier Pte Ltd, p. 451-460 10 p. (10th International Conference on Shock and Impact Loads on Structures 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bridges 100%
  • Girder 75%
  • Performance 50%
  • Simulation 25%
  • Deformation 25%
• 2012

  An analytical study about dynamic failure mechanism of anchor bolts embedded in concrete

  Munemoto, S. & Sonoda, Y., 2012, Proceedings of the 10th International Conference on Advances in Discontinuous Numerical Methods and Applications in Geomechanics and Geoengineering, ICADD 10. CRC Press, p. 387-392 6 p. (Proceedings of the 10th International Conference on Advances in Discontinuous Numerical Methods and Applications in Geomechanics and Geoengineering, ICADD 10).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Failure (Mechanical) 100%
  • Bridges 60%
  • Anchor Bolt 60%
  • Bond Failure 40%
  • Fracture 20%

• First draft of performance-based design code for Japanese protective structures

  Sonoda, Y. & Tamai, H., 2012, Advances in Protective Structures Research: IAPS Special Publication 1 - Proceedings of the IAPS Forum on Recent Research Advances on Protective Structures. Taylor and Francis - Balkema, p. 305-330 26 p. (Advances in Protective Structures Research: IAPS Special Publication 1 - Proceedings of the IAPS Forum on Recent Research Advances on Protective Structures).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Impact Loads 100%
  • Design 66%
  • Performance 66%
  • Administrative Structure 33%
  • Protective Structure 33%
  1 Citation (Scopus)
• 2011

  Analytical study on impact response characteristic of wire ring net system by using the concept of particle method

  Sonoda, Y., Hata, Y. & Fukunaga, K., 2011, Proceedings of the 9th International Conference on Shock and Impact Loads on Structures. p. 605-613 9 p. (Proceedings of the 9th International Conference on Shock and Impact Loads on Structures).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Wire 100%
  • Rock 62%
  • Net System 50%
  • Impact Response 37%
  • Japan 25%

• An analytical study about dynamic failure mechanism of anchorage zone of cocrete embedded anchor bolt

  Munemoto, S. & Sonoda, Y., 2011, Proceedings of the 9th International Conference on Shock and Impact Loads on Structures. p. 501-506 6 p. (Proceedings of the 9th International Conference on Shock and Impact Loads on Structures).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Failure (Mechanical) 100%
  • Anchor Bolt 100%
  • Failure 100%
  • Concrete 80%
  • Bridges 60%

• A numerical approach for damage evaluation of RC slab under single and repeated impact loading

  Tamai, H., Sonoda, Y., Kawabata, Y. & Shinozaki, M., 2011, Proceedings of the 9th International Conference on Shock and Impact Loads on Structures. p. 643-651 9 p. (Proceedings of the 9th International Conference on Shock and Impact Loads on Structures).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Impact Loads 100%
  • Beam 45%
  • Evaluation 13%
  • Performance 13%
  • Structural Behavior 9%

• A study of violent water induced impact problems using ISPH method

  Aly, A. M., Asai, M. & Sonoda, Y., 2011, Proceedings of the 9th International Conference on Shock and Impact Loads on Structures. p. 217-224 8 p. (Proceedings of the 9th International Conference on Shock and Impact Loads on Structures).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Models 100%
  • Model 100%
  • Experimental Result 66%
  • Water 66%
  • Invariance 66%

• A study on the estimation of failure mode in impact analysis using SPH method

  Sonoda, Y., Tokumaru, S. & Fukazawa, J., 2011, Performance, Protection and Strengthening of Structures under Extreme Loading. p. 332-337 6 p. (Applied Mechanics and Materials; vol. 82).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Beam 100%
  • Shears 100%
  • Failure (Mechanical) 66%
  • Algorithm 66%
  • Shear Failure 66%
  1 Citation (Scopus)

• Fast dynamic solver for the design of bridge using a model order reduction

  Asai, M., Iida, H., Amin, N. M. & Sonoda, Y., 2011, Proceedings of the 9th International Conference on Shock and Impact Loads on Structures. p. 225-234 10 p. (Proceedings of the 9th International Conference on Shock and Impact Loads on Structures).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Models 100%
  • Model 100%
  • Reduction 66%
  • Steel 66%
  • Bridges 66%

• Impact response analysis of wire ring net system using the concept of particle method

  Sonoda, Y., Hata, Y. & Fukunaga, K., 2011, Performance, Protection and Strengthening of Structures under Extreme Loading. p. 446-451 6 p. (Applied Mechanics and Materials; vol. 82).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Wire 100%
  • Net System 50%
  • Rock 40%
  • Impact Response 40%
  • Particle 20%

• Impact response simulation of mortar beam using ASPH method

  Mokhatar, S. N., Sonoda, Y. & Tokumaru, S., 2011, Proceedings of the 9th International Conference on Shock and Impact Loads on Structures. p. 481-490 10 p. (Proceedings of the 9th International Conference on Shock and Impact Loads on Structures).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Beam 100%
  • Impact Loads 66%
  • Mortar 50%
  • Low Velocity 33%
  • Constitutive Equation 33%

• Numerical studies on cumulative damage of RC members under repeated impact loading

  Tamai, H. & Sonoda, Y., 2011, Performance, Protection and Strengthening of Structures under Extreme Loading. p. 320-325 6 p. (Applied Mechanics and Materials; vol. 82).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Impact Loads 100%
  • Beam 60%
  • Crack Propagation 40%
  • Impact Behavior 40%
  • Analysis Method 20%
  2 Citations (Scopus)
• 2010

  A fundamental study on the SPH method application for impact response of RC structural members

  Fukazawa, J. & Sonoda, Y., 2010, Analysis of Discontinuous Deformation: New Developments and Applications. p. 495-504 10 p. (Analysis of Discontinuous Deformation: New Developments and Applications).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2005

  Fluid viscous damper optimal design for seismic protection of bridges

  Berton, S., Takahashi, T. & Sonoda, Y., 2005, Proceedings of the 10th International Conference on Civil, Structural and Environmental Engineering Computing, Civil-Comp 2005. (Proceedings of the 10th International Conference on Civil, Structural and Environmental Engineering Computing, Civil-Comp 2005).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Fluid 100%
  • Viscous Damper 100%
  • Joints (Structural Components) 80%
  • Bridges 60%
  • Bridge Structure 40%
• 2003

  A fundamental study on deterioration of the existing RC beam by chemical and mechanical damage

  Sonoda, Y., Murato, N. & Hikosaka, H., 2003, Fatigue Damage of Materials: Experiment and Analysis. Varvani-Farahani, A., Brebbia, C. A., Varvani-Farahani, A. & Brebbia, C. A. (eds.). p. 295-306 12 p. (Advances in Damage Mechanics).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Damage Evolution 100%
  • Beam 66%
  • Chemical Damage 66%
  • Steel Bar 50%
  • Deterioration 50%
  2 Citations (Scopus)

• Fatigue damage analysis of welded structures based on continuum damage mechanics

  Thepvongsa, K., Sonoda, Y. & Hikosaka, H., 2003, Fatigue Damage of Materials: Experiment and Analysis. Varvani-Farahani, A., Brebbia, C. A., Varvani-Farahani, A. & Brebbia, C. A. (eds.). p. 309-319 11 p. (Advances in Damage Mechanics).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Fatigue Damage 100%
  • Residual Stress 66%
  • Welded Structure 66%
  • Damage Evolution 33%
  • Fatigue Behavior 33%