Department of Marine Systems Engineering

2023

Assessment of the stiffened panel performance in the OTEC seawater tank design: Parametric study and sensitivity analysis

Lutfi, Y. M., Adiputra, R., Prabowo, A. R., Utsunomiya, T., Erwandi, E. & Muhayat, N., Jul 2023, In: Theoretical and Applied Mechanics Letters. 13, 4, 100452.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

Fatigue strength improvement method for thin sheet GMA welding joints by weaving

Matsuda, K., Ishida, Y. & Kodama, S., Mar 2023, In: Welding in the World. 67, 3, p. 733-739 7 p.

Research output: Contribution to journal › Article › peer-review

Free vibration and stability of a fully submerged pipe aspirating water: An experiment and new physical insights

Hisamatsu, R. & Utsunomiya, T., Jan 2023, In: Journal of Fluids and Structures. 116, 103789.

Research output: Contribution to journal › Article › peer-review

Open Access

3 Citations (Scopus)

Hydrodynamic Forces of DP Jack-Up Leg when Operating in Vicinity of Seabed

Thulkar, N. D. & Yamaguchi, S., Mar 2023, In: Journal of Ship Research. 67, 1, p. 1-12 12 p.

Research output: Contribution to journal › Article › peer-review

2022

Analysis of energy conservation by roof shade installations in refrigerated container areas

Shinoda, T., Budiyanto, M. A. & Sugimura, Y., Dec 1 2022, In: Journal of Cleaner Production. 377, 134402.

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Analysis of Wrist Hand Motion for Monitoring of Basic Welder Training using Wearable Sensors

Pribadi, T. W. & Shinoda, T., Feb 4 2022, In: IOP Conference Series: Earth and Environmental Science. 972, 1, 012010.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

BENCHMARK STUDY OF WELDING DEFORMATIONS IN STIFFENED PLATE

Josefson, B. L., Chen, B. Q., Gotoh, K., Wang, F., Liu, K., van Duin, S. & Dong, P., 2022, Materials Technology; Pipelines, Risers, and Subsea Systems. American Society of Mechanical Engineers (ASME), V003T03A005. (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 3).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Concepts of Big Data Analysis of Container Terminals in the Digital Era

Mathias, T. N. & Shinoda, T., Feb 4 2022, In: IOP Conference Series: Earth and Environmental Science. 972, 1, 012005.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

Coupled response characteristics of cold water pipe and moored ship for floating OTEC plant

Hisamatsu, R. & Utsunomiya, T., Jun 2022, In: Applied Ocean Research. 123, 103151.

Research output: Contribution to journal › Article › peer-review

Open Access

2 Citations (Scopus)

Design Evaluation Methodology for Ships’ Outfitting Equipment by Applying Multi-criteria Analysis: Proper Choices Analysis of Ballast Water Management Systems

Buana, S., Yano, K. & Shinoda, T., 2022, In: International Journal of Technology. 13, 2, p. 310-320 11 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Development of an Underwater Towed Exploration System for Archaeological Relics

Yamaguchi, S., Fukuda, Y. & Shindo, Y., 2022, Proceedings of the 32nd International Ocean and Polar Engineering Conference, ISOPE 2022. International Society of Offshore and Polar Engineers, p. 1200-1205 6 p. (Proceedings of the International Offshore and Polar Engineering Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Development of a Quantity Determination Method of Blasting off Conditions

Shinoda, T., Tanaka, T. & Morimitsu, K., 2022.

Research output: Contribution to conference › Paper › peer-review

Expansion of laser–arc hybrid welding to horizontal and vertical-up welding

Uemura, T., Gotoh, K. & Uchino, I., Mar 2022, In: Welding in the World, Le Soudage Dans Le Monde. 66, 3, p. 495-506 12 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

EXPERIMENTAL STUDY on DYNAMIC CHARACTERISTICS of FLUID-CONVEYING PIPE for OTEC

Hisamatsu, R., Adiputra, R. & Utsunomiya, T., 2022, Ocean Space Utilization. American Society of Mechanical Engineers (ASME), V004T05A013. (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 4).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

FINITE ELEMENT MODELLING of OCEAN THERMAL ENERGY CONVERSION (OTEC) COLD WATER PIPE (CWP)

Adiputra, R. & Utsunomiya, T., 2022, Ocean Space Utilization. American Society of Mechanical Engineers (ASME), V004T05A012. (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 4).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3 Citations (Scopus)

Hand Motion Analysis for Recognition of Qualified and Unqualified Welders using 9-DOF IMU Sensors and Support Vector Machine (SVM) Approach

Pribadi, T. W. & Shinoda, T., 2022, In: International Journal of Technology. 13, 1, p. 38-47 10 p.

Research output: Contribution to journal › Article › peer-review

Open Access

4 Citations (Scopus)

Investigation of fatigue strength of root of lap fillet welds of thin sheet and improvement method

Matsuda, K. & Yonezawa, T., Nov 2022, In: Theoretical and Applied Fracture Mechanics. 122, 103667

Research output: Contribution to journal › Article › peer-review

Maneuvering simulations of twin-propeller and twin-rudder ship in shallow water using equivalent single rudder model

Okuda, R., Yasukawa, H., Sano, M., Hirata, N., Yoshimura, Y., Furukawa, Y. & Matsuda, A., Jun 2022, In: Journal of Marine Science and Technology (Japan). 27, 2, p. 948-970 23 p.

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

Numerical Analysis of Dry Bulk Cargo Load in a Cargo Hold Due to Ship Vertical Acceleration

Yanagimoto, F., Sugimoto, K., Ishibashi, K. & Yanagihara, D., 2022, Proceedings of the 32nd International Ocean and Polar Engineering Conference, ISOPE 2022. International Society of Offshore and Polar Engineers, p. 3279-3284 6 p. (Proceedings of the International Offshore and Polar Engineering Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Study on Probabilistic Risk Assessment Model for Crossing Situation in Sunda Strait

Prastyasari, F. I. & Shinoda, T., Feb 4 2022, In: IOP Conference Series: Earth and Environmental Science. 972, 1, 012043.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Timing of stand-on ship actions for cooperative collision avoidance under calm water condition

Lee, H. J. & Furukawa, Y., Nov 1 2022, In: Ocean Engineering. 263, 112340.

Research output: Contribution to journal › Article › peer-review

Two-phase Flow Analysis for Small-scale Ballast Water Tank Model by Hydraulics Experiment and Simulations

Liu, G., Watanabe, T. & Shinoda, T., Feb 4 2022, In: IOP Conference Series: Earth and Environmental Science. 972, 1, 012048.

Research output: Contribution to journal › Conference article › peer-review

Open Access

2 Citations (Scopus)

ULTIMATE STRENGTH

Hess, P. E., An, C., Brubak, L., Chen, X., Chiu, J. T., Czujko, J., Darie, I., Feng, G., Gaiotti, M., Jang, B. S., Kefal, A., Makmun, S., Ringsberg, J., Romanoff, J., Saad-Eldeen, S., Schipperen, I., Tabri, K., Wang, Y. & Yanagihara, D., 2022, Proceedings of the 21st International Ship and Offshore Structures Congress, ISSC 2022. Wang, X. & Pegg, N. (eds.). Society of Naval Architects and Marine Engineers, p. 395-500 106 p. (Proceedings of the 21st International Ship and Offshore Structures Congress, ISSC 2022; vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Open Access

異強度板組の抵抗スポット溶接継手の引張せん断強さと破断位置に及ぼす材料強度の影響

Translated title of the contribution: Effect of strength of steel sheets on tensile shear strength and failure mode of dissimilar joint of spot weldsOkada, T., Ueda, H., Matsuda, K., Miyazaki, Y., Yasuyama, M. & Fujii, H., 2022, In: Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society. 40, 4, p. 216-225 10 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2021

A method of automated work observation for ship production using deep neural networks

Shinoda, T., Tanaka, T., Okamoto, H. & Umemoto, D., 2021.

Research output: Contribution to conference › Paper › peer-review

A study of automatic measurement method of RPG (Re-tensile plastic zone’s generated) load

Koji, M., Mizuki, M. & Koji, G., 2021, In: Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society. 39, 2, p. 125-131 7 p.

Research output: Contribution to journal › Article › peer-review

Open Access

A study of automatic measurement method of RPG (Re-tensile Plastic zone’s Generated) Load

Murakami, K., Morishita, M. & Gotoh, K., 2021, In: Welding International. 35, 10-12, p. 483-491 9 p.

Research output: Contribution to journal › Article › peer-review

A Study on Using Hot-Rolled Steel Sheet for Ship Superstructure

Narimatsu, H., Kuwada, M. & Gotoh, K., 2021, Practical Design of Ships and Other Floating Structures - Proceedings of the 14th International Symposium, PRADS 2019 - Volume 3. Okada, T., Kawamura, Y. & Suzuki, K. (eds.). Springer Science and Business Media Deutschland GmbH, p. 243-257 15 p. (Lecture Notes in Civil Engineering; vol. 65 LNCE).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Development of interlink wear estimation method for mooring chain of floating structures: Validation and new approach using three-dimensional contact response

Takeuchi, T., Utsunomiya, T., Gotoh, K. & Sato, I., May 2021, In: Marine Structures. 77, 102927.

Research output: Contribution to journal › Article › peer-review

Open Access

5 Citations (Scopus)

Development of simplified wear estimation method considering rolling motion between mooring chain links for floating structures

Takeuchi, T., Utsunomiya, T., Gotoh, K. & Sato, I., 2021, Ocean Space Utilization. American Society of Mechanical Engineers (ASME), V005t05a016. (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 5).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Estimation of ultimate strength of ring-stiffened cylindrical shells under external pressure with local shell buckling or torsional buckling of stiffeners

Shiomitsu, D. & Yanagihara, D., Apr 2021, In: Thin-Walled Structures. 161, 107416.

Research output: Contribution to journal › Article › peer-review

Open Access

4 Citations (Scopus)

Linear vs non-linear analysis on self-induced vibration of OTEC cold water pipe due to internal flow

Adiputra, R. & Utsunomiya, T., May 2021, In: Applied Ocean Research. 110, 102610.

Research output: Contribution to journal › Article › peer-review

Open Access

12 Citations (Scopus)

New Method to Predict the Viscosity of Bitumen Diluted with Light Oil Using a Modified Van der Wijk Model under Reservoir Temperature and Pressure

Ssebadduka, R., Sasaki, K., Nguele, R., Dintwe, T. K., Novaes, T. & Sugai, Y., Apr 20 2021, In: ACS Omega. 6, 15, p. 10085-10094 10 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2 Citations (Scopus)

Overview of the Joint Industrial Project for Practical Application of Laser-Arc Hybrid Welding in Construction of General Merchant Ships in Japan

Gotoh, K., Uemura, T., Uchino, I., Narimatsu, H., Maeda, T., Torigoe, T. & Moriyama, A., 2021, Practical Design of Ships and Other Floating Structures - Proceedings of the 14th International Symposium, PRADS 2019 - Volume 3. Okada, T., Kawamura, Y. & Suzuki, K. (eds.). Springer Science and Business Media Deutschland GmbH, p. 258-272 15 p. (Lecture Notes in Civil Engineering; vol. 65 LNCE).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Prediction of hydrodynamic forces acting on ship hull based on sqcm

Ayub, F. A., Furukawa, Y. & Ibaragi, H., 2021, Proceedings of the 31st International Ocean and Polar Engineering Conference, ISOPE 2021. International Society of Offshore and Polar Engineers, p. 1583-1589 7 p. (Proceedings of the International Offshore and Polar Engineering Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Seafarers' awareness-based domain modelling in restricted areas

Lee, H. J., Furukawa, Y. & Park, D. J., 2021, (Accepted/In press) In: Journal of Navigation. 74, 5, p. 1172-1188 17 p.

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

Sensitivity analysis of hydrodynamic derivatives for lateral force and yawing moment to ship manoeuvrability

Ayub, F. A., Furukawa, Y. & Ibaragi, H., 2021, Proceedings of the 31st International Ocean and Polar Engineering Conference, ISOPE 2021. International Society of Offshore and Polar Engineers, p. 2714-2721 8 p. (Proceedings of the International Offshore and Polar Engineering Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Simplified formulation of coupled system between moored ship and elastic pipe for OTEC plantship

Hisamatsu, R. & Utsunomiya, T., 2021, Ocean Space Utilization. American Society of Mechanical Engineers (ASME), V005t05a011. (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 5).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

THE DEVELOPMENT AND CHANLLENGESOF CHINA’S SHIPBUILDING INDUSTRY

Ko, S. & Shinoda, T., 2021, 7th International Conference on Ship and Offshore Technology, ICSOT Indonesia 2021. Miftachudin, Prastyawan, R. E., Utari, D. A. & Nindyapuspa, A. (eds.). Royal Institution of Naval Architects, p. 25-34 10 p. (Proceedings of International Conference Royal Institution of Naval Architects).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

The ISSC 2022 committee III.1-Ultimate strength benchmark study on the ultimate limit state analysis of a stiffened plate structure subjected to uniaxial compressive loads

Ringsberg, J. W., Darie, I., Nahshon, K., Shilling, G., Vaz, M. A., Benson, S., Brubak, L., Feng, G., Fujikubo, M., Gaiotti, M., Hu, Z., Jang, B. S., Paik, J. K., Slagstad, M., Tabri, K., Wang, Y., Wiegard, B. & Yanagihara, D., Sept 2021, In: Marine Structures. 79, 103026.

Research output: Contribution to journal › Article › peer-review

Open Access

21 Citations (Scopus)

Thermal simulation of the effect of solar radiation on the temperature increases on the refrigerated container walls

Budiyanto, M. A. & Shinoda, T., 2021, In: International Journal of Sustainable Engineering. 14, 5, p. 1229-1238 10 p.

Research output: Contribution to journal › Article › peer-review

Open Access

6 Citations (Scopus)

Transient motion control of an underwater glider based on numerical analysis

Yamaguchi, S. & Miyai, Y., 2021, Proceedings of the 31st International Ocean and Polar Engineering Conference, ISOPE 2021. International Society of Offshore and Polar Engineers, p. 283-288 6 p. (Proceedings of the International Offshore and Polar Engineering Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

レーザ・アークハイブリッド溶接を厚板突合せ継手製造に適用するためのΛ形開先採用に関する一検討^＊

Translated title of the contribution: A study on adopting Λ-shape groove for laser-arc hybrid welding to construct thick plate butt welded jointsUchino, I., Uemura, T. & Gotoh, K., 2021, In: Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society. 38, 4, p. 403-417 15 p.

Research output: Contribution to journal › Article › peer-review

Open Access

位相差を有する面内二軸繰返し負荷を受ける平板及び面外ガセット継手角回し部から成長する疲労表面亀裂の成長挙動

Translated title of the contribution: Paper review of ⇜fatigue surface crack growth behavior in flat plate and out-of-plane gusset-welded joints under biaxial cyclic loads with different phases”Gotoh, K., 2021, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 90, 5, p. 357-358 2 p.

Research output: Contribution to journal › Short survey › peer-review

2020